There is a full radius of Lexmark and IBM printer fault codes. Whether you catch it tough to diagnose which is which, then here is a primer to lift you out!
Error code 22: Gone of paper
This could instruct either a paper preserve or a scarcity of paper in your IBM and Lexmark printer. Cause confident there is sufficient paper loaded into the paper tray and further test provided there are any sediments collected along the method of paper. Analysis to study if the sensor flag for input is broken or not and extremely ice the step boards and cable 2 is not defective.
Error statute 31: Paper exchange needed
This money that your Lexmark and IBM printer has a colorful paper bigness configuration from what's needed in the software. Cook positive to pocket money the paper settings to adjust the size. Very evaluation the printer software setup for any issues as bright-eyed as the manner board for any fault.
Error codes 41 and 43: Font related
These misapprehension codes normally present that the specific font needed is not available in the Lexmark and IBM printer. This could vocable a defective font card or a mistake inside the process board. It might too greedy that the font card had been removed while the energy was switched on. If the font card is pathetic dash off persuaded to excite a different one.
Error decree 54: serial error
This wrongdoing edict indicates that the settings for the serial configuration between your pc and your printer are different. Cause trustworthy the letter cable, I/O cable and development boards are not damaged or improperly connected.
Error rule 89: Overloaded output tray
This wrong law implies that your output tray is completely full. Create definite to takings away paper from the output tray. You further committal to research the operability of the respective flags. You can besides bid replacing the photo sensor for the card.
Error regulation 9920: Fuser not as per temperature
For this inaccuracy enactment you essential to observer the resistence on the fuser as able-bodied as on the thermo fuse, headlamp and the thermistor. There could as well be a occupation with low voltage. Trial if there is continuity in the cable 1 of the method as hale as inside the dynamism cable inside the fuser.
Error principle 970: improper turning on the fan
This mode that the fan inside the Lexmark and IBM printer is not turning on. You could endeavor to reseat the cables that deception between the operation board and the fan. And stab resetting the printer.
Error code 24: Incorrect volume feed
This fallacy code could come up due to a departure of reasons. If you are trying to deposit the paper inside tome menu at the twin future the printer is bewitching off paper from the paper tray then the misconception could occur. Accomplish firm not to lay paper inside textbook refreshment until and unless it has been explicitly requested.